If you are looking to improve the efficiency of the plumbing system of your residential or commercial property, there are some full-proof ways in which you can achieve this. One of the most significant benefits of doing this is that it helps conserve water and energy. Hence, we recommend that each and everyone should look for ways in which they can reduce the consumption of energy and save water at the same time.
No matter, if your plumbing system is old or new, if you want to enhance its efficiency, we have got your back. The efforts that you will make today to save energy helps immensely in saving the environment. The steps that we list below are some simple, whereas others are complicated. If you think it to be a complicated process, contact experts like SewerSquad. However, you can follow the simple steps at your convenience for effective results.
The first and foremost thing that you should do is to determine if all the fixtures are working properly and none of them requires replacement or repair. Without further ado, let us get started with the tips to enhance efficiency.
Page Contents
Employe Fixtures of Low-Flow:
The low-flow fixtures are categorised as special devices that are used for applications of several types that enable water flow. The device helps control the flow of liquid, i.e you can either increase or decrease the flow of water as and when required. This device helps property owners save energy and water at the same time and is hence considered beneficial. You can choose to install this device in faucets, showerheads, toilets, etc.
You can choose to contact professionals to learn more about the solutions that enable control of water flow. Installing a dual flush toilet is another great way of saving several gallons of water every year. Also, if you are using the same toilet for several years now, consider getting it inspected thoroughly to enhance its efficiency.
Tankless Water Heaters:
If you are using a traditional water heater, then you should know that it can hold at least 40 gallons of water in the tank. That said, to heat that much water up to a required temperature will consume a lot of energy. No matter if you are working or sleeping, the heater is working to keep the water warm, and hence it is consuming energy every time.
This process does nothing but simply wastes energy. Therefore, we recommend getting a tankless heater installed since it doesn’t store water to keep a certain amount of it warm. Such heaters work by running cold liquid through coils, which further helps reduce the consumption of electricity and bills at the same time. Consider getting a conventional one changed with a new water heater.
Choose To Get The Plumbing System Regularly Maintained:
Most homeowners and commercial space owners are often concerned about their air systems and plumbing systems. However, you should know that these systems are not the only plumbing components that require attention and regular maintenance, several other components should be taken care of.
You should opt for regular maintenance of other home plumbing fixtures to make sure that they work properly and are in adequate condition. Hence, we recommend you hire professional plumbing services to get fixtures inspected as and when required. Experts will make sure that the plumbing systems are not wasting water and energy and are in good enough condition to last long.
Get Insulation Enhanced:
Did you know? Pipe insulation is a lot more beneficial than just protecting it from getting frozen during the winter season. Also, if you insulate the hot pipes as well, it will help reduce the loss of water that may take place when the water is flowing to the faucet from the heater. When being used, it stores hot water as well that just sits there in the faucet. This is done to prevent the liquid from getting cold again.
It means that when the faucet is turned on again, the water will be adequately hot, and hence, less amount of energy will be wasted to heat the liquid.
Get Worn Out Pipes Replaced:
Check for the plumbing and pipe system of your entire property. If you find that any of the pipes are leaking then choose to get it changed at the earliest. One of the crucial facets of ensuring the efficiency of the plumbing system is the supply of cold and hot water. Another major concern is the disposal of wastewater. Maintenance and its repair come at the last. However, it is equally crucial.
If the pipes installed in the plumbing system are very old, there are chances that it leaks. Hence, you should not ignore this situation. Getting the old plumbing systems replaced well on time helps ensure the efficiency of the plumbing system to a great extent.
Faucet Aerators Will Help Too:
No doubt, considering a low-flow fixture is an ideal solution, but besides reducing the amount of liquid that flows, it also reduces water pressure. The consumers were not happy with this result and so not all of them were satisfied after considering the option. Moreover, some people liked the idea but they also used to take longer than usual to get the tasks done for which faucet was needed.
Installing a new faucet aerator is another brilliant idea that can be opted for. It helps reduce the flow of liquid, along with its consumption, but keeps the water pressure the same.
The tips discussed above are all tried and tested methods that work. However, you may consider some to be the best, whereas the others may not be as fruitful for you. There is no one-size-fits-all, but keep in mind that your efforts will not go to waste.
Summary
Plumbing systems in most homes are believed to use water more than what is required. Hence, we should always be on the lookout to conserve water and energy so that it turns out to be an effective solution. It helps enhance the efficiency of the plumbing system as well. That said, there are several benefits of trying out the efforts listed above.